With only two pieces to put together, the Genecigs 510 electronic cigarette is very easy to assemble. Follow these simple steps and you’ll be ready to vape in no time.
Step 1 – Unboxing
Inside your 510 Starter Kit box, you will find:
Two 180mAh rechargeable batteries. These cylindrical white objects have LED tips that glow red when you take a puff from your e-cigarette.
Five blank cartomisers. Since everyone’s tastes are different, the orange cartomisers in the 510 Starter Kit do not come with a pre-filled e-liquid flavour. The easy process of filling your blank cartomisers with e-liquid is explained in Step 3.
You will also have an instruction manual, a USB cable charger and a wall plug.
Step 2 – Charging your battery
Take one battery, screw it into the cable charger, and connect the charger to either a USB port or to the wall plug provided. The indicator light on the cable charger will glow red while the battery is charging. When your battery is fully charged, the indicator light will turn green.
NOTE: The initial battery charging process can last several hours. Subsequent charges take approximately 1 hour.
Step 3 replica oakleys – Filling your cartomiser with e-liquid
Take one cartomiser and remove the rubber mouthpiece cap.Â Inside the cartomiserÂ you will see some absorbent trellis. white gauze surrounding a small central tube with a wire in it. The gauze holds e-liquid, and the wire heats it into vapour for you to inhale.
Take a bottle of e-liquid that you purchased separately from the 510 Starter Kit and carefully pour in 20-25 drops. Avoid getting e-liquid in the central tube; aim to saturate the surrounding gauze. Pause for 10 seconds between every few drops to allow the gauze to soak up the e-liquid.Â When you’re done, replace the mouthpiece cap.
TIP: Don’t fill the cartomiser so much that e-liquid pools on top of the gauze, or you might suck the excess fluid into your mouth when vaping. This is a bad-tasting experience. If the cartomiser gurgles when you start to vape, it’s probably a tad over-filled and you may need to puff gently and cautiously until the e-liquid level evaporates down, or even pour out a drop or two before continuing.
A full cartomiser should last around 200 puffs, which roughly equivalent to a pack of tobacco cigarettes. When the flavour and/or volume of vapour starts to wane, it’s time to top up the cartomiser with more e-liquid. 10-15 drops are sufficient for topping up.
The idea Fake Oakleys is to always keep the gauze wet without over-filling the cartomiser. The heating wire will singe the gauze if you let it cheap nfl jerseys dry out, which results in unpleasant burnt-tasting vapour. Should your cartomiser become burned, it’s best to throw it away and start again with a fresh one.
Step 4 – Connecting your battery and cartomiser
Take one charged battery and one filled cartomiser, and screw them together:
You now have a fully assembled 510 e-cigarette.
StepÂ 5 – Activating your battery
If your 510 electronic cigarette is an automatic version, all you need to do is inhale from the cartomiser mouthpiece. Cheap Jerseys from china This triggers the automatic battery’s activation sensor.
The manual version of the 510 e-cigarette just as easy to operate. Simply hold down the small activation button on the side of the manual battery while inhaling.
For both types of 510,Â you’ll know that the battery is active when you see the LED tip glowing red.
<img fake oakleys class=”aligncenter size-medium wp-image-1343″ title=”The sweet glow of success” src=”http://genecigs.com.au/wp-content/uploads/2012/06/glowing510-300×1861.png” alt=”” width=”300″ height=”190″ />
Now that you’re properly set up, let’s go over How to Vape with Your 510.